Luminous tape directions for use:
1, before using, please put the product on a fluorescent lamp or other light irradiation for 20 – 30 minutes, after turning off the light,you can see the glowing effect. Products must first absorb the light, put out the lamp,then will shine.
2, if it is used for performance: we suggest that the performers wear black clothes, with a black light illuminate, make dark effect first before using the product, and please let the tape absorb the light about 20-30 minutes, then immediately go to one the stage,the effect is best.
The color is night luminous effect
Luminescent Value:
Initial lighting source is 1000LX, Activating time is 15 minutes,
Luminescent value at 5 seconds ≥ 4000 mcd/m2
Luminescent value at 30 minutes ≥ 15 mcd/m2
Luminescent value at 60 minutes ≥ 8 mcd/m2
Luminescent value at 300 minutes ≥ 1.5 mcd/m2
Optical storage time:4 hours
Service Life: Indoor about 8 years, outdoor about 5 years
Available color: light green,green,blue
Other technical datas:
1. Surface Film: PET type
2. Thickness of film: 0.16mm, Thickness of Glue:0. 04mm
Thickness of Release Paper: 0.18mm, total thickness of products: 0.38mm
Above thickness is with allowance of 5% more or less
3. Weight of Release Paper: 160g/sqm with 5% more or less
4. Type of Adhesive: Pressure-Sensitive Type
5. Strength of Adhesive: after sticking to the board for 24 hours, at the condition of 0.8kg, 5min, total length: 10cm, the falling Length≤ 2cm
6. Operation temperature: 10 c—-30 c
7. Working temperature: -20c — 60c
(after sticking to the board for at least 7 days)
8. Storage temperature: 0 c—-30 c
Reviews
There are no reviews yet.